Some people say that you can tell a lot about a designer by the test equipment he keeps - for the curious, these are the main tools residing on and around my benches these days.
Fluke 8520A - Ultra-high precision 5-1/2 digit. Does 4-wire resistance measurements, programmable filters, sample rates, many options.
Fluke 8050A - 4-1/2 digit, does DB measurements. Good precision instrument.
Fluke 8010A (2) - Basic 3-1/2 digit DMM, Handy 10A mode for monitoring higher power devices.
Fluke 8800A - Older 5-1/2 digit LED DMM,
Fluke 8600A - Older 4-1/2 digit LED DMM.
Fluke 8060A (2) - Arguably one of the best DMMs Fluke ever made. 4-1/2 digit, DB measurements, frequency counter. Ultra reliable.
Fluke 76 - 3-3/4 digit, Frequency counter, Capacitance, Lo-Ohm range. Nice touch/hold feature. Very rugged.
Fluke 10 - Small and simple 3-3/4 digit, I use it mainly as a continuity buzzer and for quick voltage measurements.
Micronta 22-168 - 3-1/2 digit, 20Mhz Freq, Capacitance, Transistor tester, logic probe, Max/Min & mamories. Has RS-232 interface to capture readings.
Micronta 22-304B, 22-211 - Some tasks are best served by a simple analog meter.
Fluke 1920A (2) - 9-digit, 5hz-520Mhz, ultra-high precision.
Fluke 1912A (2) - 7-digit, 5hz-520Mhz, period, total-count, high-precision option installed.
Navtel 4800A - 8-digit, 5hz-520Mhz
RS 22-305 - 8-digit, 1Mhz-1Ghz
Hewlet Packard 54201D (2) - Lots of measurement capability available via direct front panel entry. Does 50Mhz in a single-shot capture, and 300Mhz with random sampling of repetitive waveforms. 27 channel logic analyser triggering.
Tektronix TDS210 - Handy portable LCD DSO. 60Mhz analog, and 1Gsample allows full-rate single-shot capture.
Gould OS4000 - Older traditional format 10Mhz, DSO with full analog mode as well. Has a unique "roll" mode which allows easy capture of pre-trigger events. For certain things is just the right tool for the job.
Tektronix 7623A - 100Mhz 4-channel analog storage (mainframe) with 7A26 (2) and 7B53A plug-ins. Nothing beats it when you need to see more than two things at once.
JDR 2000 - Basic dual-channel analog scope.
Hewlet Packard 1630D - 43 channels 25/100Mhz. Good basic analyzer
Tektronic 1240 - 54 50Mhz channels installed. I've got many ROM packs, expansion modules etc.
Bayly STA-02 - Selective Tone Analyzer. Two variable tone generators, DTMF generator, Precise DB measurements at selectable frequency. 2-wire/4-wire interfaces.
RS 33-2050 - Sound pressure meter
Edsyn 951SX - Variable temperature soldering station.
Weller WTCP-N - Soldering Station
Weller DS600 - Desoldering station
Soldapullt DS017 - Desoldering pump
Data I/O 29B - With Unipak2B, Gangpak and Logicpak adapters, many PLD adapter for Logicpak including PALASM and H&L ROM modules.
Data I/O 29A - With Unikak2, Gang programming module and Logicpak adapters.
Gtek 7128 - Portable EPROM programmer.
P&E ICD16 - 68HC16 in-circuit programmer.
Kanda - Various in-circuit flash-device programming dongals.
Homebuilt - Eprom programmer
Most of the time when I need an eval board for a particular processor, I just build one - but a quick inventory of my offics turns up these commercial offerings:
Cirrus EDB9301 - EP9301 (ARM9) Eval board
Signum JTAGjet-ARM - ARM JTAG debugger
Realtek RT-ICE - RTS8505 in-circuit emulator
Motorola MC68HC05EVM - 68HC05 Evaluation module/emulator
Motorola MC68HC11EVM - 68HC11 Evaluation module/emulator
Motorola MC68HC12EVB - 68HC12 Evaluation board
Motorola MC68HC16EVB - 68HC16 Evaluation board
Motorola MEX68KECB - 68000 Evaluation board
Intel ECM-96 - 80(1)96 Evaluation board
Intel SDK-85 - 8085 Evaluation board
Cygnal C8051F005DK-U - 8051 Evaluation board
Ceibo DS-750 - DS750/8051 Evaluation board/programmer
Ceibo DS-752 - DS752/8051 in-circuit emulator
ST Micros - ST7 Evaluation board
Avnet - 68HC908GP20 Evaluation board
Kanda - AVR workshop, AVR-Mega workshop with eval boards
New Micros - 80C535, 68HC11, 68HC16, 68HC812, eval boards.
Versacom SBCZ8-01 - Z8 Evaluation board
Intek - 68HC16 Evaluation board
MMT - ECM320/520 eval boards, 2051 Design center
MOS KIM1 - 6502 Evaluation board
Intersil 6960 - I6100 (PDP-8) evaluation board
Homebuilt - 8051 in-circuit-emulator (Ok - this one isn't commercial, but I have a page about it)
Anatek 50-1D - Dual variable (0-50v) with individual voltage and current meters for each side.
Diawa RS-300 - 1-15v variable at 30A. V/C meter.
Motorola VPN1022A - Fixed 13.8V 15A
Swtpc 143D - 0-15v variable with voltage & current meters.
Powerstat Variac (2) - Essential for PS evaluation, reform caps etc.
Homebuilt - 0-15V variable with fixed 5V +/-12v outputs.
Homebuilt - Several fixed +5, +/-12v supplies
RS 22-301 - Logic probe.
Homebuilt - General test platform.
Homebuilt - PC based test tools.
Homebuilt - "light bulb" current limiter, switchable 25-225w.