A PC based 8051/52 and Dallas 80C320/520 Simulator
EMILY features an easy to use "windowed" user
interface, and is capable of simulating at better than 500,000
instructions per second on a 486/33mhz PC.
 | Supports full 64K of PROGRAM and 64K of DATA memory. DATA
and PROGRAM memory may also be overlaid into a single 64K
address space. |
| Optionally interfaces with a Resident Control Program
(supplied) on your target system which allows you to include
the physical I/O lines, timers, serial port etc. in your
simulation. |
| Single step, Multi Step, Animate and High Speed execution
modes, with 4095 instruction traceback recorder in all
modes. |
| Simultaneous on-screen displays of program disassembly,
internal memory, CPU registers and simulation messages. |
| Full screen editors for CPU registers, Special Function
Registers (SFR's), and each of the INTERNAL, EXTERNAL DATA
and PROGRAM memory spaces. |
| All of the above may be viewed/altered at any time during
the debugging session. |
| Multiple breakpoints are transparent to the user program. |
| Supports the additional SFR's and internal RAM of the 8052
series, and is user configurable for additional SFR's of
expanded chips. |
| Serial I/O in a window on the screen, or redirected to a
PC COMM port. |
| Includes MONICA52, a PC hosted monitor program for
ON-BOARD debugging, with a user interface that's virtually
identical to EMILY52. |
| Supports single-chip in-circuit emulation using DS5000
CPU. |
| Now includes Emily320! |
|
|
link! You can purchase an unlock key later, to
open the full package.
