A collection of our most useful PC based
tools for your workbench.
Includes:
 |
Full DLM and PCLA
packages |
|
EPROM and 8051ICE from our Project Plans |
|
I2CE - a parallel port I2C EEPROM programmer
(24Cxx devices) |
|
AVRLOAD - a parallel port In Circuit
programmer for AVR devices. |
DLM
Data Line Monitor. Turns your P.C. into a DATASCOPE.
This program monitors both sides of an asynchronous data
communications line using a passive "Y" cable
connecting to the monitored devices and TWO comm ports (COM1 -
COM4). This tool is invaluable for debugging ANY asynchronous
connection (TERMINALS, MODEMS, PRINTERS etc.)and PROTOCOL,
by allowing you to actually SEE the data and signals being
passed between the devices.
| "Split Line" display for easy DTE/DTE viewing,
updated in "real time". |
| Displays/Stores hardware handshake signals and ASCII/HEX
data. Up to 32k events may be reviewed and/or saved to
disk for later reference. |
| Includes "Line Error Simulator" - make errors
happen on your terms. |
| Includes directions for constructing your own
"Y" cable. |
Monitors and records logic signals in real time.
Very handy tool for debugging hardware handshaking, clocked
interfaces and other signals.
|
Uses the PC parallel port. No
additional hardware required. |
|
Monitor and record up to 13 separate
parallel port input signals. |
|
Sampling rates up to 500khz (2us) on 486 and
higher PC's. |
|
Full triggering on all inputs, High (1), Low
(0), and Don't Care (X) |
|
Stores up to 65536 samples after trigger
match, and 256 before. |
|
Displays all logic levels at once in a
parallel display occurring in chronological ordering.
All entries are numbered/timestamped, and display can scroll
through all available entries. |
|
Search for bit patterns and combinations,
count state changes...more! |
|
Includes design for "Programmable Clock
Generator", used to slow fast targets to a manageable
speed. |
|
|
link! You can purchase an unlock key later, to
open the full package.
